105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Van Ert Electric Company, Inc.

Struck against stationary object or equipment while rising · Pinched nerve

Federal OSHA recorded a severe workplace injury at Van Ert Electric Company, Inc., 1040 West Fulton Street, WAUPACA, WISCONSIN 54981 on — Pinched nerve , affecting the neck, except internal location of diseases or disorders.

An employee was on top of a cooler removing conduit when he struck his head on the ceiling while wearing his hard hat. He was hospitalized with a pinched nerve in his C7 vertebra.

Hospitalized Neck, except internal location of diseases or disorders Ceilings

Van Ert Electric Company, Inc.

An employee was connecting plugs to a power distribution center when they sustained an electrical shock and burns to both arms.

VAN ERT ELECTRIC COMPANY INC.

An employee was pulling cable from a 4160-volt switch gear when the cable made contact with an energized spark arrestor, causing an arc flash. The employee suffered burns to the face and both hands.

View Van Ert Electric Company, Inc.'s full OSHA safety record →

Cooperative Laundry

An employee bent over to pick up sheets off the floor. As she as standing back up, her head struck a clamp on a piece of machinery, resulting in a skull fracture.

Rent The Runway Inc.

An employee was climbing a portable ladder to retrieve an item from the second level when she hit her head against a ceiling reinforcement. The employee sustained a concussion and lacerations.

TranSource Truck & Equipment

An employee was underneath a construction loader truck while working on it. As the employee got up, they struck their head on the frame of the truck and were hospitalized overnight for a concussion.

Mission Foods

An employee was squatting to inspect a dough mixer. She struck her head and lost her balance, causing her to grab onto a piece of machinery. The machine crushed her right index finger, resulting in an amputation.

Union Paving & Construction Co., Inc.

An employee was setting a pipe in a trench about 3 feet deep. When he stood up, his head hit the wall of the trench and he suffered a neck injury.

Smart Building Technologies - A Fidelity Company

An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.

Abbott Electric Inc

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

Mintcrest Corp

An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.

Cupertino Electric, Inc.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

Swedberg Electric, LLC

The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.