Direct exposure to electricity, unspecified · Electrocutions, electric shocks
At a glance
Federal OSHA recorded a severe workplace injury
at Global Advanced Metals, 650 County line Rd., BOYERTOWN, PENNSYLVANIA 19512
on — Electrocutions, electric shocks, affecting the bODY SYSTEMS.
Final narrative
An employee was testing recent repairs to a cooler system when he was electrically shocked, causing him to lose his balance and fall down a flight of stairs. He suffered a head laceration and body trauma, requiring hospitalization.
An employee was installing a 15-amp breaker in an electrical panel when a 12-gauge ground wire touched the positive busbar of the panel, resulting in an arc flash. The employee sustained a second-degree burn to their left hand.
An employee was repairing an HVAC system in the drop tile ceiling of a conference room when they were shocked, causing them to fall from the ladder. The employee sustained burns to their right middle and ring fingers.
An employee was replacing a contactor inside an electrical panel attached directly to a press. The press itself was receiving power from another main panel. After replacing the contactor, the employee flipped the switch and an arc flash occurred, burning the employee's elbow, bicep, and neck.
An employee was attempting to switch a medium-voltage primary cable and install a 200-amp fuse barrel. The employee contacted the bottom of the switch gear cradle for the fuse barrel, causing an arc blast. The electricity entered the employee s left hand and exited his big toes, resulting in electric shock and burns to the left hand, arm, shoulder, and both feet. The employee was hospitalized.
On December 6, 2023, an employee of Duke Energy was working on a single-phase 120-/240-volt parallel service re-tap when a secondary flash occurred in an underground service. The employee suffered a second-degree burn to the face and was hospitalized.
More severe injuries in this industry (NAICS 331410)
An employee opened a roll-off container while standing behind the box. Scrap metal fell out of the door and landed on their left leg, causing a fracture just above the ankle.
An employee was removing scrap metal pieces from work he was conducting and placing the scraps behind him. He kicked the scrap metal out of the way, and in doing so, cut his right leg just below the calf muscle and above the top of his boot. The employee required surgery for a torn Achilles tendon.
On March 28, 2024, at about 2:30 AM, two employees were using a manual metal crimping tool to secure steel straps around a pallet of finished product. The injured employee's right little finger became pinched in the tool, resulting in a partial amputation.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.