Struck by discharged object or substance · Puncture wounds, except gunshot wounds
At a glance
Federal OSHA recorded a severe workplace injury
at Voestalpine Roll Forming Corporation, 250 Martin Luther King Blvd., FARRELL, PENNSYLVANIA 16121
on — Puncture wounds, except gunshot wounds, affecting the hand(s), unspecified.
Final narrative
An employee was assembling a wooden pallet using a pneumatic nail gun when a nail went through the employee's hand. The employee was hospitalized for hand trauma.
An employee was installing wood trim surrounding a skylight inside a home. While holding a piece of trim in it's desired location, his pneumatic nail gun discharged, sending a 3/4-inch pin nail into his left forearm.
An employee removed a safety valve on a trailer that unknowingly contained nitrogen gas. The gas released from the trailer and pushed the employee backward off a scaffold approximately 10 feet before they struck a garage door, resulting in a pelvic injury.
An employee was sitting at her workstation when a nail gun malfunctioned and shot a nail into her left leg. She suffered a puncture and blood vessel injury and was hospitalized.
On November 25, 2023, an employee was using a high-pressured water hose to perform sewer line cleaning operations. The employee's right little finger and palm were lacerated by pressurized water from the hose.
An employee was jogging a steel coil into a roll former to prepare the machine for a run. The coil started to slip, so he used his left hand to pull on it. His glove was pulled into the roll tooling, which crushed his left middle, ring, and little fingers. The employee sustained amputations to his left ring and little fingers.
An employee was operating a machine on a paint line. They were helping to remove aluminum from the machine and re-thread it when they took a step and contacted hot water in a wash tank, resulting in burns to their left foot.
A maintenance employee was troubleshooting an issue on a bundler machine when the machine actuated, striking and fracturing their right leg. The machine was not guarded or locked out at the time.
An employee was performing repairs on a crimping machine when their thumb and index finger were crushed in the crimping mechanism. The employee sustained an amputation to the finger.
An employee was maneuvering a 350-pound roll from a skid to a forklift. The roll fell onto the employee's hand, resulting in a partial right finger amputation.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.