Senox Corporation

An employee was moving an aluminum coil from a coil tilter. The coil fell, striking the employee's left leg. The employee suffered swelling to the leg.

While working on a metal slitter machine an employee sustained an amputation to the right index finger and a laceration to the right middle finger.

An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.

An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.

After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.

An employee was jogging a steel coil into a roll former to prepare the machine for a run. The coil started to slip, so he used his left hand to pull on it. His glove was pulled into the roll tooling, which crushed his left middle, ring, and little fingers. The employee sustained amputations to his left ring and little fingers.

A maintenance employee was troubleshooting an issue on a bundler machine when the machine actuated, striking and fracturing their right leg. The machine was not guarded or locked out at the time.

An employee was performing repairs on a crimping machine when their thumb and index finger were crushed in the crimping mechanism. The employee sustained an amputation to the finger.

An employee was maneuvering a 350-pound roll from a skid to a forklift. The roll fell onto the employee's hand, resulting in a partial right finger amputation.

An employee was struck on the shoulder by a forward moving forklift. He fell and the forklift ran over his left foot. A toe on the foot was amputated.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.