Caught in running equipment or machinery, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Innovative Formulations, 675 Hwy 43 E, HARRISON, ARKANSAS 72601
on — Fractures, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was dumping powdered sugar into a portable oscillating blender. A tag was dropped into the machine. The employee attempted to remove the tag and the blender pulled the employee's left hand between the metal bars and a screen, resulting in two broken fingers. The machine was running at the time.
HospitalizedFinger(s), fingernail(s), n.e.c.Mixers, blenders, whippers-food and beverage
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 424210)
An employee was walking through the facility when they struck their foot against a pallet, tripped, fell into a pallet, and landed on the concrete floor. The employee's right leg was fractured.
A delivery driver was making a delivery at a client location. He was closing the rolling door of the delivery truck when his fingertip became caught in the door, resulting in a partial amputation.
An employee was servicing a rooftop HVAC unit when their left hand became caught in the rotating belt of the machine. The employee sustained an amputation of their thumb from the first knuckle.
An employee was descending a set of rolling stairs when he missed the last step and fell to the floor. The employee was hospitalized with injuries to his ankle and leg.
An employee was installing a new conveyor belt when their right thumb became caught between the belt and the drive pulley. The employee sustained a partial amputation of the thumb.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.