Don Isbell Painting, Inc.

An employee was patrolling a store using an electric patrol scooter when they lost their balance and sustained an ankle fracture.

An employee was operating a forklift to move panels around the dock area when the vehicle struck a joint where the two floors meet. The employee lurched forward and struck his head on the steering wheel. The employee then fell from the vehicle and sustained a dislocated disc in their back, requiring hospitalization.

An employee was standing inside a semi-trailer when the driver of the semi-trailer pulled away, causing the employee to fall backward and strike their head on a steel dock plate. The employee suffered a skull fracture, a fractured L1 vertebra, a broken coccyx, a laceration/abrasion to the head, and a brain bleed.

An employee was riding an ATV, catching up with a stray cow to return it to a pen. The ATV tire struck a hole or other obstacle, causing the employee to be ejected and fall to the ground. His leg was broken and he was hospitalized.

An employee was driving a van in reverse when they fell out of the vehicle and landed on the ground in the parking lot. The employee sustained a fractured left hip.

An employee was on a 12-foot extension ladder while painting the wall and soffit area of a pavilion less than 6 feet off the ground. The employee was using a sprayer when he fell off ladder and landed on his arm on the dirt clay ground. The employee sustained a dislocated elbow and fractures to his right arm and wrist that included an open fracture. The employee was hospitalized and required surgery.

An employee was blasting a water tower. They fell approximately 60 feet off a suspended scaffold and sustained broken vertebrae, a compound fracture of the tibia, a fractured heel, and a rupture to their liver. The employee was hospitalized.

An employee was sandblasting paint from a water tower when the blasting media sprayed across their forearm, resulting in an elbow injury that required hospitalization.

An employee was working from a boom lift, painting wood trim at a second-story roof level. The lift drove over an unmarked dry well, tipped, and catapulted the employee to the ground. The employee sustained fractures to their heels and vertebrae. Fall protection was not being worn at the time of the incident.

On October 2, 2025, an employee was ascending a ladder attached to a scaffold structure approximately 10 feet high. While climbing up, he lost his grip on a rung and fell to the ground, landing on his shoulder. He was hospitalized with fractures to his collarbone and shoulder.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.