105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

High Concrete Group, LLC

Struck against moving part of machinery or equipment · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at High Concrete Group, LLC, 125 Denver Rd, DENVER, PENNSYLVANIA 17517 on — Cuts, lacerations, affecting the hand(s), unspecified.

Watch High Concrete Group, LLC — free Get an email when a new federal OSHA severe-injury report for High Concrete Group, LLC is published. One employer, no account, unsubscribe in one click.

An employee was using a miter saw to cut the end of a wood piece when the saw lacerated the employee's right hand between the thumb and index finger.

Hospitalized Hand(s), unspecified Sawing machinery-stationary, n.e.c.

High Concrete Group LLC

An employee was moving concrete panels when his left index finger was pinched between a panel and a piece of wood. The finger was partially amputated.

High Concrete Group LLC

An employee was checking to see what was causing a mixer chute to jam when the valve engaged and caught the employee's fingers. Two fingertips on their left hand were amputated.

High Concrete Group LLC

An employee was using a stressing jack when hydraulic fluid blew through a pin hole in the hydraulic hose of the jack and entered his left-hand palm.

High Concrete Group, LLC

An employee was pouring a pre-cast member while standing on a concrete form. The employee fell to the ground 4.5 feet below and was hospitalized for a concussion.

HIGH CONCRETE GROUP, LLC

An employee was struck by a hydraulic jack that kicked out from a concrete form and struck him in his ribcage and right elbow. The employee was admitted to the hospital for an open wound fracture to his right elbow.

View High Concrete Group, LLC's full OSHA safety record →

Leidy's LLC

An employee was operating a band saw when his right little fingertip was amputated.

Swift Beef Company

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

Kitchen Tune-Up

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

BBCJ LUMBER LLC

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

Appalachian Wood Floors, Inc.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

SK Construction LLC

An employee was fixing a broken purlin at a worksite when they fell from the framing to the concrete floor approximately 19 feet below. The employee sustained brain bleeding and fractures to their face, vertebrae, and wrists.

Pen Gulf, Inc.

Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.

Samsung E&C America, Inc.

An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.

United Dairy Farmers

The injured employee was training a new employee on a dough machine. She went to show where the batter comes from and her right index fingertip was cut. The employee sustained an amputation to the fingertip. The machine was not guarded at the time of the incident.

MVA CONSTRUCTION LLC

An employee was operating a roller machine on a dirt slope when the machine hit a bump and fell onto it's side. While trying to get free of the falling machine, the employee's legs were pinned by the top bar of the cage. The employee was hospitalized and his left leg was amputated. He also sustained fractures to a hand and finger.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.