Direct exposure to electricity, greater than 220 volts · Third or fourth degree electrical burns
At a glance
Federal OSHA recorded a severe workplace injury
at Alabama Power Company, 3070 43rd Ave. North, BIRMINGHAM, ALABAMA 35203
on — Third or fourth degree electrical burns, affecting the hand(s) and arm(s), unspecified.
Final narrative
An employee was working from a ladder while performing an electrical evaluation at a substation. An arc flash occurred, causing second- and third-degree burns to the employee's hands and arms. The employee also fell about 4 feet from the ladder, sustaining broken ribs.
HospitalizedHand(s) and arm(s), unspecifiedElectric parts, unspecified
Employees were pulling three-phase power lines to a power pole. An employee's hand was caught between a pulley and a rope, resulting in amputation of the employee's index, middle, and ring fingertips.
Three employees were preparing to unload a burnt pole from the back of their work truck. The injured employee was standing on the driver's side step of the truck while another employee in the rear of the truck began deploying the outriggers. The injured employee stepped down from the truck underneath the outriggers, resulting in multiple fractures and a partial amputation to her right big toe.
An employee was performing maintenance on a pump for a sulfuric acid system. Some of the acid sprayed out of a leak and burned the employee's face, neck, and head.
An employee was operating a golf cart to cross an empty parking lot when the vehicle struck a utility pole that was extending from behind a truck. The employee sustained facial fractures.
An employee was descending a wooden power pole. He slipped and fell about 4 feet; his right gaff caught the pole and stopped him suddenly, causing his right knee to be dislocated.
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
An employee was performing troubleshooting and maintenance on one of the generators that feed the RF line for glue-laminated timber (glulam) beam production. He was reattaching the outer panel of the generator. A circuit was completed and the employee was electrocuted by the generator and sustained burns. The employee was hospitalized.
An employee was utilizing a utility task vehicle (UTV) to patrol a 138 kV transmission line in a right-of-way. The UTV drove into a washout hole that was approximately 6 feet deep and obstructed by vegetation. The employee sustained a dislocated shoulder, a fractured left humerus, back pain, and a strained ankle. He was hospitalized.
A crew of employees were working to replace a utility pole that was broken by a motor vehicle accident. As the crew was removing equipment from the broken pole, part of the pole broke, fell on the injured employee, and rolled over him. The employee sustained two broken shoulders, multiple broken ribs, and a damaged lung that required hospitalization and surgery.
An Ameren lineman was making secondary voltage connections in a pad-mounted residential feed transformer. The lineman contacted an energized lead bushing, sustained an electrical shock, and was hospitalized.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.