105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Star Pipe USA LLC

Direct exposure to electricity, greater than 220 volts · Electrical burns, unspecified

Federal OSHA recorded a severe workplace injury at Star Pipe USA LLC, 500 W. 4th Street, S COFFEYVILLE, OKLAHOMA 74072 on — Electrical burns, unspecified, affecting the multiple body parts, unspecified.

An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.

Hospitalized Multiple body parts, unspecified Switchboards, switches, fuses

Star Pipe USA LLC

An employee was traveling across an elevated service/working platform. The employee fell through an open floor section, striking the lower level, the floor, and some foundry equipment and suffering multiple fractures to both legs.

Star Pipe USA LLC

An employee was in the crow's nest of a charge deck operating an overhead crane to break foundry returns in a return pit. A section of gating exited the return pit and struck the employee's lower left leg, resulting in a compound fracture.

Star Pipe USA LLC

An employee was retrieving his fallen hard hat from under the mold line when the line indexed, impacting the employee's head. The employee was hospitalized for a skull fracture.

View Star Pipe USA LLC's full OSHA safety record →

Star Electric Company of Texas

An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.

Powertown Line Construction LLC

An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.

Stanley Black and Decker, Inc

On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.

Sun Valley Contractors, LLC

An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.

Versant Power

Two employees were checking electrical reclosers. During the testing, an energized bushing came into contact with one of the employees, touching his left bicep and the top of his chest on the left side and causing a shock and a burn. He was hospitalized.

Benton Foundry, Inc.

An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.

American Cast Iron Pipe Company

An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.

NIBCO INC.

An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.

American Castings, LLC

An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.

OSCO Industries Inc.

An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.