Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at TechnipFMC, Intersection of County Road 10 and County Road 43, WATFORD CITY, NORTH DAKOTA 58854
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was unscrewing a 2-inch iron elbow from a 2-inch iron straight pipe. The pipe shifted, and his left index finger was pinched between the elbow and the pipe. His left index finger was amputated at the first knuckle.
An employee was rigging chains to a crane to lift a zipper assembly. While the employee was taking slack out, their right index finger was caught between a chain and the zipper assembly. The fingertip was amputated to the nailbed.
An employee was function testing a flushing unit when the unit failed and the access panel was forced open as the filter housing ejected upward from the unit. The access panel struck the employee on his hard hat and he fell backward onto concrete, resulting in a fracture to their C1 vertebra.
An employee was using a hydraulic-pressured torque wrench to torque a bonnet connection on a valve when the elbow section of the torque head released pressure, resulting in a pressure cut/injection into the employee's left palm.
Two employees were working together to rotate a wellhead adapter. Employee 1 was using an overhead hoist and lifting strap to lift one side of the adapter and place it on its opposite side. Employee 1 began to lower the adapter down, and Employee 2's left middle finger was caught in a pinch point between the lifting strap and the part, resulting in a fingertip amputation.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 213112)
An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.
An employee was using a torch to loosen a bolt on a water trailer. Natural gas was present in the water and it ignited, causing a fire. The employee sustained third-degree burns to their upper leg.
An employee had been conducting crane operations. The employee went to stop a piece of oil and gas equipment for tubular running from falling over to the ground. Their right hand was caught between a rolling ladder and the equipment, resulting in fractures to the index and middle fingers. They were hospitalized and the middle finger required surgery.
An employee was working to install a drive belt on a water pump. He was holding the belt on both sides of the pulley, working to route it over the top. As he pulled down with his right hand, the pulley rotated and the belt slid over it, pulling his left little finger between the pulley and the belt. He suffered an amputation to the fingertip as well as a fracture to the ring finger.
An employee was on the ground working to close a trailer door. The door was caught by the wind and blew the employee backward. He landed on his back and sustained four fractured ribs, requiring hospitalization.
An employee was walking on top of boiler to close a valve. The employee fell off the boiler and landed on the floor, sustaining fractured ribs. The employee was hospitalized.
An employee was exiting a loader and coming down the ladder. His hand slipped off the railing and he fell backward onto sandy ground, landing on his side. The employee was hospitalized with a fractured pelvis and a rotator cuff tear.