International Imaging Materials, Inc.

An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.

An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.

An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.

An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.

An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.

An employee was taking out the trash through the storeroom door when the storeroom door closed on their left index finger. The employee's fingertip was amputated.

An employee had been using a hoist to add bulk bags of pigment to tanks in an area that was not air conditioned. The employee collapsed from heat stress and was hospitalized due to dehydration.

An employee was pumping varnish from a holding tank into a tub for a production batch. He was filling the tub through a flex hose. When the hot varnish started flowing, it caused the flex hose to move and spray hot varnish. The employee sustained burns to their back requiring hospitalization.

An employee was adding chemicals to a mixer when a combustible dust explosion occurred and started a fire. The employee jumped off the platform, which resulted in broken bones; the employee was also burned.

An employee was moving drums off a skid. When he set a drum back down, his ring finger was caught between the rims of two drums resulting in amputation of the fingertip.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.