Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Great Dane Limited Partnership, 177 Gateway Boulevard, STATESBORO, GEORGIA 30458
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
The injured employee was preparing to assist a second employee with riveting a trailer during the manufacturing process. The injured employee was holding a bucking bar while a second employee was riveting. The trailer was sitting on a set of stands when it shifted and caught the injured employee's left hand between the trailer frame and the stand. The injured employee suffered an amputation of the left fifth finger at the second joint and the fourth finger at the first joint.
An employee was replacing a cylinder on a hydraulic press machine. The cylinder slipped out of his right hand and struck his left hand. The tip of his left ring finger was amputated.
An employee was operating a rivet gun when the end of the rivet flew up and broke a fluorescent light bulb. Broken glass from the bulb fell on and lacerated the employee's left arm.
An employee was adjusting the drill and mash machine to address a malfunction. The machine activated and caught his left middle finger resulting in a fingertip amputation.
On August 9, 2017, at approximately 2:50 PM, an employee was operating a jib hoist to lift a rail component (350 lbs.) when his left index finger was pinched between the hoist rigging and the rail. His left index fingertip was amputated.
Employees were adjusting an 8-feet-wide rollup door. The clamp holding the door up slipped, causing the door to come forward and strike/lacerate an employee's left ear.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 336212)
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was assisting with rigging a magnet to an overhead crane in order to lift a sheet of steel. The employee's right thumb was between the crane's hook and the chain passing through the hook, and when the crane was raised, the distal end of their thumb was crushed. Part of the employee's right thumb was medically amputated.
Two employees were working together to insert a pin into a hydraulic cylinder. One employee was holding the cylinder in place to align it with the pinhole, while the injured employee was inserting the pin. The injured employee was aligning the pin and moved to determine whether the hole alignment was too high or low. At that moment, the crowbar being used to assist with alignment slipped and his left index fingertip was pinched between the cylinder and the housing, resulting in an amputation just below the fingernail.
An employee was hoisting an axle in the buggy department when one side of the sling came loose, causing the axle to tip. The sling hook raised up from the weight transfer, causing the employee's left little finger to be caught by the rigidness of the hook. The fingertip was amputated.
An employee was using a circular saw to cut the cap off an aluminum bulkhead of a trailer that was being manufactured. The saw kicked, lacerating his hand and resulting in the amputation of his left middle and ring fingertips.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.