Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Quickdrain USA, 2597 W. 64th Ave., DENVER, COLORADO 80221
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was cleaning off the cutting area around a router machine when the router bit partially amputated his fingertip. The router was running and guarded at the time of the incident.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332913)
An employee was on a ladder four feet above the ground to install insulation. The ladder began to slide and the employee jumped to the shop floor, breaking his left tibia and fibula at the ankle. He was hospitalized, requiring surgery.
An employee was replacing a rubber pad on the cylinder of a test station. Their right index finger was caught between a hydrant and a pneumatic cylinder of the test machine resulting in amputation of the fingertip.
An employee was driving a pallet jack. As they went to turn down an aisle, their foot was pinned against the pallet racking, resulting in a foot injury and laceration.
An employee was operating a hydraulic press, loading pre-cut tubes of copper into a feeder when the die closed on their right hand. The employee's right second, third, and forth fingers were amputated at the second knuckle.
An employee was conducting grinding operations on a cast iron pipe using a portable grinder. The grinder kicked back and struck the employee's right wrist and knee. The employee sustained a laceration to his right knee and a cut to his right wrist that injured an artery and a tendon.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.