NEW CASTLE, PENNSYLVANIA—
Ellwood Quality Steels Company
Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Ellwood Quality Steels Company, 700 Moravia Street, NEW CASTLE, PENNSYLVANIA 16101 on — Heat (thermal) burns, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
An employee was finishing a vertical mold set-up when the lid fell. The employee entered the mold to try to retrieve the lid. The mold next to the one he was in was filled with molten steel. He could not get out of the mold and was burned by the radiant heat from the adjacent mold. He suffered burns to 6% of his body (hands, back, buttocks).
More severe injuries at Ellwood Quality Steels Company
NEW CASTLE, PENNSYLVANIA—
Ellwood Quality Steels Company
An employee working in the bottom pour area experienced heat stress symptoms due to excessive heat.
NEW CASTLE, PENNSYLVANIA—
Ellwood Quality Steels Company
An employee was on the ground in a stripping/bricking area, working with a cab crane operator to set rods. As the crane lifted a rod out of a center tile setter and hoisted it up, the sheave cover on the 20-ton hoist lifted a trumpet by the trumpet ear. Once the trumpet came off the ground, the base kicked out. The trumpet pinned the employee's right leg against the tile setter.
NEW CASTLE, PENNSYLVANIA—
Ellwood Quality Steels Company
An employee was preparing to pick up two steel, round bars to be loaded into a truck. In order to have space for the lifting tongs to grab the bars, the employee needed to move the wedges to space the round bars out. The tongs were resting on the round bars and as the employee reached between the tongs and the round bar to move the wedge, the tongs fell on the employee's hand, pinching it between the tongs and the round bar. The employee sustained crush injuries that required surgery.
NEW CASTLE, PENNSYLVANIA—
Ellwood Quality Steels Company
An employee had finished cutting a round metal ingot with a saw. The employee went to move the scrap piece and it fell/sank down into a bed of mechanical rollers. The mechanical rollers are normally used to remove the scrap piece out of the way so the piece can be lifted by a crane. The employee then attempted to manually move the scrap piece by pulling it off of the mechanical rolls. The piece was too heavy and rolled backwards towards the ingot. The employee's left middle finger became trapped/pinched between the ingot and scrap piece, resulting in a fingertip amputation.
NEW CASTLE, PENNSYLVANIA—
Ellwood Quality Steels Company
An employee was working as a bottom pour laborer and became disoriented. The employee was diagnosed with heat stroke.
View Ellwood Quality Steels Company's full OSHA safety record →
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 331110)
LEVITTOWN, PENNSYLVANIA—
Floworks International LLC
An employee fell while entering the building. The employee was hospitalized with a fractured ankle and required surgery.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PEORIA, ILLINOIS—
Keystone Consolidated Industries, Inc.
An employee was working to close a furnace door. The hydraulic mechanism that opens and closes the furnace door was non-operational and had been disconnected to allow the furnace door to be opened manually. As the employee was releasing the pins that held the door open, the door and the hydraulic cylinder fell, pinching their left hand between the hydraulic cylinder's base plate and the furnace. The employee suffered amputation of the little fingertip.
SEGUIN, TEXAS—
Commercial Metals Company
A rolling mill was shut down due to a cobble between two mill stands. The injured employee was cleaning the cobble from the delivery side of stand A, while another employee went to the control panel to move stand B and stand A moved instead. The injured employee's right thumb got caught between the delivery guide of stand A and the looper trough. The tip of his thumb required surgical amputation to the bone to allow for stitches.
BEAVER DAM, WISCONSIN—
Metalcraft of Mayville, Inc.
An employee was helping another employee load stock material onto a press brake when the stock slipped. The injured employee's right index finger was caught between the press brake die and the stock, resulting in amputation at the first knuckle.
More severe injuries in PENNSYLVANIA
WYNNEWOOD, PENNSYLVANIA—
Main Line Clinical Labs
An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.
POCONO SUMMIT, PENNSYLVANIA—
Ardent Mills
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
LANCASTER, PENNSYLVANIA—
Zimmerman & Herr
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
EBENSBURG, PENNSYLVANIA—
McAneny Brothers, Inc.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
PITTSBURGH, PENNSYLVANIA—
Metz Culinary Management LLC
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.