Proampac

On August 23, 2022, an employee was removing trim waste from a converting machine (pouch machine) when his left index finger contacted the blade. The nailbed and fingertip pad were amputated.

An employee was checking belt tension in a machine. A roller caught the employee's finger, causing a fingertip amputation.

An employee was removing a piece of debris from a paste pad when their right little finger contacted moving agitator gear, resulting in a fingertip amputation.

An employee was cutting a cardboard core on a core cutting machine when the core spun out of the machine, striking the employee in the face and mouth. The employee suffered nose, sinus, and palate fractures.

An employee was pulling on a bale of corrugated cardboard boxes that were on a conveyor. The straps on the bale failed and the employee fell to the floor. The employee was hospitalized and required surgery for a fractured femur and/or hip.

On December 27, 2023, an employee was delivering mail to an apartment complex when their knee gave out and they fell to the ground. The employee was hospitalized with a left tibia fracture.

An employee was walking to the inventory cage when her ankle gave out and she fell to the floor. The employee sustained a femur fracture and was hospitalized.

An employee was dislodging a pallet that was stuck when boxes of product fell onto them, causing them to fall to the ground. The employee suffered a fractured femur.

An employee was exiting an elevator when he lost balance and fell to the floor, resulting in a fractured hip.

An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.

An employee was shadowing coworkers while in training on the wide extrusion line. The employee went to clean the roller with a rag and cleaner when his right index finger got caught between a powered roller and a rubber roller. The employee sustained an amputation to a finger.

An employee was clearing a jam in a machine when it cycled. His hand was caught in the die, resulting in the amputation of two fingertips.

While operating a machine, an employee noticed that a piece of plastic material was stuck to a chrome roll. The employee was removing the plastic when their arm came into contact with the rollers. The employee suffered a contusion to the upper arm between the elbow and the shoulder.

On June 9, 2025, a machine operator was using a sorting machine to sort/clean plastic sheets. While she was freeing stuck sheets on the lift table, the table engaged and crushed her against the top railing, trapping her torso. The employee was hospitalized with contusions to her back.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.