ProAmpac

On August 23, 2022, an employee was removing trim waste from a converting machine (pouch machine) when his left index finger contacted the blade. The nailbed and fingertip pad were amputated.

An employee was checking belt tension in a machine. A roller caught the employee's finger, causing a fingertip amputation.

An employee was trying to shake a pebble out of her shoe when she lost balance and fell on her right side in the employee parking lot. She fractured her right hip.

An employee was cutting a cardboard core on a core cutting machine when the core spun out of the machine, striking the employee in the face and mouth. The employee suffered nose, sinus, and palate fractures.

An employee was operating a band saw when his right little fingertip was amputated.

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.

An employee was shadowing coworkers while in training on the wide extrusion line. The employee went to clean the roller with a rag and cleaner when his right index finger got caught between a powered roller and a rubber roller. The employee sustained an amputation to a finger.

An employee was clearing a jam in a machine when it cycled. His hand was caught in the die, resulting in the amputation of two fingertips.

While operating a machine, an employee noticed that a piece of plastic material was stuck to a chrome roll. The employee was removing the plastic when their arm came into contact with the rollers. The employee suffered a contusion to the upper arm between the elbow and the shoulder.

On June 9, 2025, a machine operator was using a sorting machine to sort/clean plastic sheets. While she was freeing stuck sheets on the lift table, the table engaged and crushed her against the top railing, trapping her torso. The employee was hospitalized with contusions to her back.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.