Jr. Davis Construction Company, Inc.

An employee was cutting sanitary pipe when he began to feel overheated and experience a headache and difficulty breathing. He then sat in the air conditioned work truck to cool down until he returned to work. The employee was carrying tools when symptoms reoccurred and he began to experience muscle cramping, resulting in hospitalization for heat illness.

Employees were installing an intermediate driveshaft in the driveline of a dump truck. One employee went under the truck to visually observe the yoke and their left thumb was crushed/lacerated in a pinch point between the universal joint cap and the yoke.

An employee was utilizing a battery-operated circular saw to cut a 6-inch back-form board when the saw blade struck their left hand, resulting in lacerations to the middle and ring fingers.

A crew was rigging an RCP pipe to be lifted by a backhoe. The injured employee signaled for the operator to lower the pipe. He was adjusting the choker cable on the pipe when the pipe was lifted again. His left index and middle fingers were then crushed between the cable and the pipe, resulting in fingertip amputations.

An employee was preparing to connect storm pipe to a structure. The employee went to connect the choker cable to the excavator bucket and the pipe slipped and struck them. The employee sustained a crush injury to the left foot that involved multiple fractures.

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was fixing a broken purlin at a worksite when they fell from the framing to the concrete floor approximately 19 feet below. The employee sustained brain bleeding and fractures to their face, vertebrae, and wrists.

Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.

An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.

The injured employee was training a new employee on a dough machine. She went to show where the batter comes from and her right index fingertip was cut. The employee sustained an amputation to the fingertip. The machine was not guarded at the time of the incident.

An employee was operating a roller machine on a dirt slope when the machine hit a bump and fell onto it's side. While trying to get free of the falling machine, the employee's legs were pinned by the top bar of the cage. The employee was hospitalized and his left leg was amputated. He also sustained fractures to a hand and finger.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.