AMERICAN PHOENIX, INC.

On January 6, 2023, an employee was bending down to take pictures of a steel bin for a customer. A forklift hauling a double-stacked steel bin was entering the same aisle and caught the employee's right leg between the two steel material bins. The employee was hospitalized with a compound fracture of the right ankle.

An employee was operating a machine when a powered industrial vehicle struck the employee with a pallet of rubber. The employee's right lower leg was pinned between the pallet and the machine scale, fracturing it and requiring hospitalization.

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

An employee was guiding a conveyor belt through a slitter when their hand was caught between the rollers and the table. When the employee pulled their hand out, the glove was left behind and their right middle fingertip was amputated.

A maintenance employee was working to place a 120-pound metal screen on top of a machine before installation, with the help of another employee. The injured employee's right ring finger was pinched between the screen and the machine and the fingertip was partially amputated.

On September 26, 2025, an employee was performing maintenance on an excavator when a bale of rubber fell from an adjacent rack and struck him. The employee sustained multiple fractures to his pelvic area.

An employee was cleaning a mixer door. The employee's left hand came into contact with the mixer blade, which was still slowly rotating. The employee suffered amputations to the left index and middle fingertips.

A temporary employee was working to remove a detached piece of rubber EPDM product that was hanging on the outside of a feed chute. As the employee grabbed the elongated material, the material reengaged inside the machine above the feed chute and pulled back, pinching their left index fingertip. The employee's fingertip was amputated.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.