Other fall to lower level less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Waste Management of Colorado, Inc, 2331 W Hampden Ave, ENGLEWOOD, COLORADO 80110
on — Fractures, affecting the multiple pelvic region locations.
Final narrative
An employee was getting into the garbage truck when he slipped and fell backwards sustaining hip/pelvic fractures.
HospitalizedMultiple pelvic region locationsGarbage, recycling, or refuse truck
More severe injuries at Waste Management of Colorado, Inc
An employee was picking up litter on the perimeter of the complex. He was outside the facility grounds by the railroad tracks when he tripped in the rocks and fell, striking his head and knees. The employee sustained a fractured knee.
An employee exited a truck to open a gate. The truck rolled and pinned the employee against the gate; the employee suffered multiple broken ribs and a broken sternum.
On 7/17/2020, at 3:00 PM, an employee entered a screen machine to clear debris from the spindles and discs. The employee exited the screen machine via the downstream conveyor. The employee walked alongside the conveyor to exit the area and fell through a material chute at the end of the conveyor to the ground 17 feet below. The employee was hospitalized for a concussion and fractures to the left leg, pelvis, ribs and face.
An employee was walking to an enclosure to collect the trash that was in it. While walking, he slipped and fell on the ice and snow. When he landed on the paved parking lot surface, he fractured his patella and severed some tendons, requiring surgery.
An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.
An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.
An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.
An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.
An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.
More severe injuries in this industry (NAICS 562111)
An employee was operating the compaction levers on a truck when a motor vehicle crashed into the back of the stopped truck. The employee sustained fractured ribs and contusions.
A maintenance employee was moving a forklift from the loading dock when the forklift fell off the dock. The employee was struck by the overhead portion of the roll bar, injuring his right knee. He was hospitalized and underwent surgery.
An employee was standing on the driver side rear step of a trash truck while traveling down a road to collect residential trash. The employee went to signal the driver and slipped off the step while the truck was traveling 8-9 miles per hour. He fell 18 inches to the ground and was hospitalized with a fractured ankle that required surgery.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.