Fall from collapsing structure or equipment 21 to 25 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at BAKERY FEEDS, 2700 E 3rd St, HOPE, ARKANSAS 71801
on — Fractures, affecting the multiple foot (feet) locations.
Final narrative
An employee was repairing a tower master where cables come out of a bucket to load modules of dough into a trailer. He climbed into one of the buckets and a kink formed in the cable, which slid off a U-bolt and jerked, dropping about 4 feet. Later, the cable came loose and the bucket fell about 25 feet to the ground with the employee still inside. He fractured his right foot and pinky toe and injured his vertebrae, requiring hospitalization.
HospitalizedMultiple foot (feet) locationsConveyors-bucket, cup
A crew was using a seamer to install roof panels on a new building. As the employee was placing the seamer on a platform at the edge of the roof, the employee stepped onto the platform. The platform and the employee then fell approximately 23 feet to the ground. The employee sustained a lower back injury.
An employee was moving 6x6 wood debris while repairing a roof when the roof caved in and the employee fell 24 feet to the concrete floor below. The employee suffered bruised lungs, a scratch on his right lung, multiple spinal vertebrae fractures, and a fractured left iliac crest. Fall protection was not used at the time of incident.
An employee was climbing a 32-foot fiberglass extension ladder to get onto a roof. When the employee was a little more than halfway up the ladder, the fiberglass cracked and the ladder failed. The employee fell onto the deck below, resulting in fractures to both heels.
An employee was inspecting the existing metal roofing system of a commercial property when the roof gave way and he fell approximately 20-25 feet to the floor in the warehouse space below. The employee sustained a head injury, kidney and liver lacerations, and fractures to the orbital bone, right wrist, pelvis, and ribs.
An employee was using a portable ladder to descend into a shaft. Both side rails of the portable ladder snapped, causing the employee to fall approximately 22 feet to the concrete level below. The employee sustained lacerations on their head and multiple fractures to their hip and pelvis.
More severe injuries in this industry (NAICS 311613)
A temporary employee was working to unclog butter from a butter melter pump. His right index finger was caught in the machine, and the fingertip was amputated. The machine was energized at the time.
An employee working at the reject conveyor was placing a product guide bar on the conveyor. This metal guide bar is placed on the side of the conveyor belt to funnel the product, preventing it from falling off the sides. As he was getting the attachment positioned, his left ring finger was caught between the conveyor belt and the conveyor belt frame. The employee's finger was fractured and partially amputated.
An employee was using a pneumatic impact wrench to tighten bolts on a brake press anvil. The impact wrench hooked up on something, causing the tool to rotate. This spun his left hand with it. Their index finger was pinched between the side handle of the tool and an anvil bolt on the press, resulting in an open fracture. The employee required a medical amputation of the fingertip.
An employee was cleaning the area under a mobile elevated work platform. The platform lowered and struck the employee, resulting in a fractured right femur. The employee was hospitalized.
As an employee was opening an infeed valve. Hot tallow oil in the line above fell back down the pipe and came out of an open pressure relief valve, striking the employee on the thighs. The employee was hospitalized with second-degree burns to his thigh. Another employee sustained burns to their back but they were not hospitalized.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.