105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

GKN Sinter Metals, LLC

Injured by slipping or swinging object held by injured worker · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at GKN Sinter Metals, LLC, N112 W18700 Mequon Road, GERMANTOWN, WISCONSIN 53022 on — Cuts, lacerations, affecting the forearm(s).

An employee was using an angle grinder when the tool kicked back and severely lacerated the employee's left forearm, causing tendon and muscle damage. The employee was hospitalized and had surgery.

Hospitalized Forearm(s) Hand grinders-powered

GKN Sinter Metals, LLC

An employee was loading ceramic plates into a tray carrier as the plate advance mechanism was returning to the home position. The employee went to prevent the stack of plates from tipping over when his right glove was pulled into the housing around the plate advance mechanism, causing an amputation of the right middle and ring fingertips as well as a finger fracture. OSHA: more information?--machine?

GKN Sinter Metals, LLC

An employee was pushing a cart. Parts fell from the cart onto her leg, causing broken bones.

GKN Sinter Metals, LLC.

An employee was removing a 66-pound slug out of a machine. The employee had a jack under the slug and was attempting to put a washer on when the jack slipped, causing the slug to fall and hit the employee's right middle finger. The employee's fingertip was amputated.

View GKN Sinter Metals, LLC's full OSHA safety record →

Mako Contracting, LLC

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

East Penn Manufacturing

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

Ash Brothers Fireplace and Chimney Co

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

RPM & Associates Inc

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

Tenaris Hickman

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

Omni Manufacturing, Inc.

An employee was working to remove scrap from the vicinity of a scrap shaker tray located at the rear of a press when she suffered a laceration and partial amputation of her right index finger.

Wrico Stamping of Texas

An employee was loading a die plate onto a rack when the plate tipped down and pinched his finger, lacerating it. The employee sustained an amputation.

MILBANK MANUFACTURING

An employee was placing a flattener die on a turret press. The die broke loose and fell into the turret. The employee's right hand was pinched between the turret and the die, resulting in a partial amputation of the little finger.

Superior Metal Products Inc

An employee was un-banding metal blanks from pallets. He stepped on a pallet where the boards of the pallet overhung the runners, causing him to lose his footing and fall to the floor. The employee sustained injury to his left hip requiring hospitalization.

MMP of Merrill, Inc.

An employee was clearing a jam in the spot welder when the machine activated and crushed their right thumb, resulting in amputation of the thumb tip.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.