Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at GKN Sinter Metals, LLC, 5710 Vits Drive, MANITOWOC, WISCONSIN 54220
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was loading ceramic plates into a tray carrier as the plate advance mechanism was returning to the home position. The employee went to prevent the stack of plates from tipping over when his right glove was pulled into the housing around the plate advance mechanism, causing an amputation of the right middle and ring fingertips as well as a finger fracture.
OSHA: more information?--machine?
An employee was using an angle grinder when the tool kicked back and severely lacerated the employee's left forearm, causing tendon and muscle damage. The employee was hospitalized and had surgery.
An employee was removing a 66-pound slug out of a machine. The employee had a jack under the slug and was attempting to put a washer on when the jack slipped, causing the slug to fall and hit the employee's right middle finger. The employee's fingertip was amputated.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332117)
An employee was running a sizing press. He was changing totes and needed to verify the sizes on the new tote of parts. While he was removing a part, the machine, operating in inch mode, crushed his left index fingertip between the pin, punch, and die. The employee sustained an amputation to left index finger. The machine was unguarded at the time of the incident.
An employee was removing a mold (weighing over 50 pounds) from a press machine to take the mold to another location. When he put the mold down, it dropped onto his finger and amputated his fingertip at the knuckle.
At 9:20 a.m. on Saturday August 17, 2024, an employee was running a sizing press machine when his right hand was caught in the press. The employee sustained an amputation of his ring finger at the knuckle and injuries to his index, middle, and little fingers that required stitches.
An employee was working on a sizing press. They were putting a part into the sizing press when the machine cycled. The employee sustained an amputation to their right index finger.
An employee was cleaning the tooling in a mechanical power press when the ram drifted down and caught the employee's right middle finger. Their fingertip was amputated.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.