Trident Seafoods Corporation

On July 7, 2025, an employee was cleaning food from under a conveyor belt. He was retrieving a piece of food when his left middle finger contacted the chain and pulley. The fingertip was amputated. The machine was guarded at the time of the incident.

On December 16, 2024, at approximately 3:07 p.m., an employee was feeding frozen fish blocks via a conveyor belt into a floor mounted electrically powered grinder. The grinder became jammed with the fish material. The worker deenergized the machine and used a rolling ladder to climb approximately 4 feet in the air to unjam it. As the fish block became dislodged, the momentum of the action caused the fish block to slam down on her right thumb and the machine, causing a partial amputation of the thumb tip.

On January 29, 2024, an employee was accessing a bagging machine from beneath to clear a jam. Her hand was caught in the machine's point of operation, where a heat sealer bar and cutter amputated her left index finger at the first knuckle. The machine was operating at the time of the incident.

On November 4, 2023, an employee was unclogging an oil line for a fryer and began by closing the valves at the fryer drain, pump, and intersection in the pipe. This caused the short section of the pipe to become pressurized. As the employee opened the valve at the bottom of the fryer, the air in the pipe blew up into the fryer full of hot oil, causing it to overflow onto their hands. The employee suffered second-degree burns to both hands.

An employee was walking across a deck wearing boots when he tripped, resulting in a leg fracture. The employee was hospitalized and had surgery.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

On July 7, 2025, an employee was cleaning food from under a conveyor belt. He was retrieving a piece of food when his left middle finger contacted the chain and pulley. The fingertip was amputated. The machine was guarded at the time of the incident.

On December 16, 2024, at approximately 3:07 p.m., an employee was feeding frozen fish blocks via a conveyor belt into a floor mounted electrically powered grinder. The grinder became jammed with the fish material. The worker deenergized the machine and used a rolling ladder to climb approximately 4 feet in the air to unjam it. As the fish block became dislodged, the momentum of the action caused the fish block to slam down on her right thumb and the machine, causing a partial amputation of the thumb tip.

An employee opened a fillet machine to remove a fish that had gotten stuck when their left hand made contact with the blade, resulting in cut ligaments between the thumb and index finger.

An employee was cleaning a fryer when cleaning chemicals contacted their left leg, resulting in chemical burns.

An employee was moving a loading ramp to the dock when the ramp became stuck. While dislodging it, the ramp fell on their left hand. The employee sustained a partial amputation to their left middle finger.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.