Trident Seafoods Corporation

On December 16, 2024, at approximately 3:07 p.m., an employee was feeding frozen fish blocks via a conveyor belt into a floor mounted electrically powered grinder. The grinder became jammed with the fish material. The worker deenergized the machine and used a rolling ladder to climb approximately 4 feet in the air to unjam it. As the fish block became dislodged, the momentum of the action caused the fish block to slam down on her right thumb and the machine, causing a partial amputation of the thumb tip.

On January 29, 2024, an employee was accessing a bagging machine from beneath to clear a jam. Her hand was caught in the machine's point of operation, where a heat sealer bar and cutter amputated her left index finger at the first knuckle. The machine was operating at the time of the incident.

On November 4, 2023, an employee was unclogging an oil line for a fryer and began by closing the valves at the fryer drain, pump, and intersection in the pipe. This caused the short section of the pipe to become pressurized. As the employee opened the valve at the bottom of the fryer, the air in the pipe blew up into the fryer full of hot oil, causing it to overflow onto their hands. The employee suffered second-degree burns to both hands.

An employee was walking across a deck wearing boots when he tripped, resulting in a leg fracture. The employee was hospitalized and had surgery.

On November 11, 2021, at approximately 5:45 AM, a temporary employee tripped over a wheel on a smock holder and fell to the floor. The employee was hospitalized with a hip fracture.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

On December 16, 2024, at approximately 3:07 p.m., an employee was feeding frozen fish blocks via a conveyor belt into a floor mounted electrically powered grinder. The grinder became jammed with the fish material. The worker deenergized the machine and used a rolling ladder to climb approximately 4 feet in the air to unjam it. As the fish block became dislodged, the momentum of the action caused the fish block to slam down on her right thumb and the machine, causing a partial amputation of the thumb tip.

An employee opened a fillet machine to remove a fish that had gotten stuck when their left hand made contact with the blade, resulting in cut ligaments between the thumb and index finger.

An employee was cleaning a fryer when cleaning chemicals contacted their left leg, resulting in chemical burns.

An employee was moving a loading ramp to the dock when the ramp became stuck. While dislodging it, the ramp fell on their left hand. The employee sustained a partial amputation to their left middle finger.

An employee was washing plastic tubes in the tank washroom near a belt and pulley system when his hand became caught in the rotating metallic parts of the system. The employee sustained the amputation of two fingers and lacerations to two fingers. The belt and pulley system was unguarded at the time.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.