Direct exposure to electricity, 220 volts or less · Electrical burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Aireko Energy U.S., LLC., Building 363-Rear Parking Lot Transporatation Building, WASHINGTON, DISTRICT OF COLUMBIA 20032
on — Electrical burns, unspecified, affecting the multiple body parts, unspecified.
Final narrative
While kneeling in front of a meter cabinet, an employee came in contact with a 13-kilovolt wire within the cabinet. An arc flash severely burned the right side of the employee's body.
HospitalizedMultiple body parts, unspecifiedSwitchboards, switches, fuses
An employee was installing cables to run behind the breaker controls in the main electrical room. The employee was standing on the third rung of a 6-foot A-frame ladder. As the employee was pushing a cable behind the panel, the ladder tipped, causing the employee to fall approximately 3 feet to the floor. The employee landed on their left hand and suffered a fractured wrist. The employee was hospitalized.
An employee was setting up music for a fitness class. As the employee plugged their personal device into the outlet, she was shocked. The employee experienced pain in her left side, mainly in her arm and head.
Two employees were testing the phase voltage of the 208 volt bus bar circuit. An arc flash occurred during the testing. One employee suffered burns to the face, neck, and hands. Another employee suffered burns to his arm.
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.
An employee was stocking and ordering the meat case on the sales floor when he slipped and fell due to water on the floor. The employee was hospitalized with a fractured ankle and required surgery.
An employee was working on an exhaust fan on the roof when he tripped on a wire and fell to the ground. The employee sustained scrapes on his elbow, and a fractured right knee with a torn ACL. The employee was hospitalized.