Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Camso Manufacturing USA, Limited, 1 Industrial Blvd W Cir, PLATTSBURGH, NEW YORK 12901
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was performing a pre-cording operation, which is part of the manufacturing of snowmobile tracks. While pulling a cord tight, the machine caught and amputated the tip of his left little finger.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326291)
An employee was operating a rubber roller grinder and had just completed the grinding process. He changed the rotation of the spindle to the clockwise position and began to clean rubber dust off the rollers with a shop rag. The rag caught on the roller and pulled his hand into the grinding wheel, resulting in a broken wrist, broken fingers, and lacerations to the hand and fingers. He was hospitalized.
An employee was clearing jammed material from an extruder machine. The employee reached their left hand through the unguarded opening between the extruder machine and the conveyor belt to manually dislodge the jam and contacted the moving chain and sprockets, resulting in an amputation to the left thumb.
At about 10:05 a.m. on March 10, 2025, an employee was working at the loading side of a mix conveyor when his right wrist was caught in a pinch point between the conveyor and a roller. He suffered laceration and fracture injuries to the wrist and was hospitalized.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.