Valley Rubber, LLC

An employee was unloading a machine and a part fell off. The employee reached to catch it and the glove on their left hand was caught in the belt resulting in an amputation to the left middle finger.

An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.

An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.

A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.

Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

An employee was working in the mixing department in an indoor warehouse when he began to sweat and cramp. He sustained heat exhaustion.

An employee was operating a rubber roller grinder and had just completed the grinding process. He changed the rotation of the spindle to the clockwise position and began to clean rubber dust off the rollers with a shop rag. The rag caught on the roller and pulled his hand into the grinding wheel, resulting in a broken wrist, broken fingers, and lacerations to the hand and fingers. He was hospitalized.

An employee was clearing jammed material from an extruder machine. The employee reached their left hand through the unguarded opening between the extruder machine and the conveyor belt to manually dislodge the jam and contacted the moving chain and sprockets, resulting in an amputation to the left thumb.

At about 10:05 a.m. on March 10, 2025, an employee was working at the loading side of a mix conveyor when his right wrist was caught in a pinch point between the conveyor and a roller. He suffered laceration and fracture injuries to the wrist and was hospitalized.

An employee was working on a cutter press machine when they suffered an amputation to the right thumb and lacerations to two fingers.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.