Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at BENJAMIN MOORE & CO., UNION AVE EXT, JOHNSTOWN, NEW YORK 12095
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee had adjusted the tension on a machine's chain/belt, then energized the machine to evaluate its operation. His hand slipped into the chain area; his finger was caught between the chain and sprocket, and he suffered partial amputations to the left ring and middle fingers. At the time of the incident, the machine's lockout/tagout had been removed and the chain area was unguarded.
An employee was unwrapping a pallet of empty buckets. The employee stepped backward and was struck by a powered industrial truck carrying a pallet of bucket lids, resulting in a left ankle fracture.
An employee was unloading trash into a bin from a loading dock area when he slipped on ice and fell onto his left side, breaking three ribs. He was hospitalized.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 325510)
An employee was operating a shear to cut metal parts when two of their fingers contacted the blade. This resulted in amputation of the left middle and index fingertips.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.
A maintenance employee was climbing a fixed roof access ladder to perform work on an HVAC unit when they fell from the ladder, over the second-floor railing, and onto the stairs below. The total distance of the fall was over 20 feet. The employee suffered multiple fractures that required hospitalization.
At about 8:00 p.m. on September 8, 2025, an employee was cleaning an extruder. While he was brushing built-up powder, his hand brushed the extruder screws. The screws caught his right index finger and amputated about a quarter inch of it.
At about 10:30 a.m. on August 7, 2025, a warehouse technician working for Tnemec Company, Inc., began sweating profusely a half-hour into their shift. The employee was using a forklift to move staged pallets of paint to a shrink-wrapper, shrink-wrap the pallets, and then load the pallets onto a truck using a forklift. The employee became ill about two hours later and was hospitalized for heat-related illness.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.