Struck by swinging or slipping object, other than handheld, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at R-V Industries Inc., 584 Poplar Road, HONEY BROOK, PENNSYLVANIA 19344
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was using an overhead crane to lift a 200-pound part and fixture to be welded. As the part was lifted, it swung upright and the employee's left thumb was caught and crushed between the table and part, resulting in a medical amputation to the thumb tip above the knuckle.
An employee was cutting angle iron when the hold-down mechanism smashed the tip of his left middle finger. The employee underwent a medical amputation to the finger.
An employee was working from an aerial scissor lift when a coworker activated a crane to test the limit switches. The crane hook snagged the aerial lift on the way up and threw the employee to the ground. The employee suffered a broken wrist and bruised ribs.
A crew was pulling a 4-inch plastic gas pipe off a reel and straightening it for installation. The injured employee stepped up on the trailer to cut the last band holding the pipe in the coil on the reel. As he turned to step off the trailer, the end of the pipe rotated and sprung out of the cage surrounding the coil, striking the employee on the side of the head and knocking him off of the trailer into the roadway. The employee suffered head trauma that required hospitalization.
An employee and a co-worker were performing a pick inside a clear well. They rigged the skid pan that was full of broken concrete. When lifting, the load began to swing toward a wall. The employee tried to stop the skid pan from swinging and was struck by the pan, resulting in fractures to their left hip and wrist.
The employee had just completed refueling a lattice crane that was breaking up material and was winding the fuel hose back into the fuel truck when he was struck by the catwalk/stairs of the crane. The employee was hospitalized with a laceration to his backside, possible internal bleeding, and a broken hip.
An employee was fusing 10-inch black rubber utility pipes together using a pipe fusion machine and could not get the pipes to set correctly. The employee used a nylon strap attached to an excavator to lift one side of a pipe off a steel plate. As his hand was between two pipes, the pipes came back together, partially amputating two of his fingers.
An employee was lifting four bags of a lime blend weighing approximately 10,000 pounds using a crane. The load swung and pinned the employee against a structural I-beam, resulting in fractures to the hip and pelvis.
More severe injuries in this industry (NAICS 332313)
A steel tube fell from a straddle truck onto an employee's foot, causing the steel toe of the employee's shoe to press into the employee's left foot. The employee sustained fractured phalanges and was hospitalized.
An employee was unloading materials from the back of a flatbed trailer. The employee fell off the back of the trailer approximately 4 feet to the ground below, resulting in a fractured left collarbone and fractured ribs. The employee was hospitalized.
An employee was bending material in a mechanical brake press when the press rotated and caught his right hand. His finger was crushed between the die and a steel plate, resulting in amputation of the finger.
An employee was cleaning pans containing adhesive by pouring acetone into the pans. After soaking, the employee used a plastic spatula to scrape the paint from the pan. During scraping, a fire spontaneously started underneath the employee near the pan. The employee threw the container of acetone out of the way to avoid it catching on fire, and spilled acetone onto his clothing, causing the fire to spread. The employee suffered burns to both hands and the right calf.
The injured employee was assisting a co-worker to transfer a V-baffle (large piece of angle iron weighing 736 lbs.) into a vessel shell. The injured employee stepped off the end of the vessel and fell backward. The employee sustained a dislocated left shoulder, a fractured left wrist, a fractured lower right leg, and a laceration to the left eyebrow.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.