DECATUR, ALABAMA—
Hexcel Corporation
Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Hexcel Corporation, 3300 Mallard Fox Drive, DECATUR, ALABAMA 35601 on — Heat (thermal) burns, unspecified, affecting the hand(s), unspecified.
Final narrative
An employee was lowering fins into a 95-degree-Celsius water bath, used to stretch fibers. A hole in the employee's left glove allowed water in, and the employee's hand was burned. The employee was hospitalized. Hot stretch gloves over cut-resistant gloves were being worn at the time of the incident.
More severe injuries at Hexcel Corporation
DECATUR, ALABAMA—
Hexcel Corporation
An employee was performing a restringing activity on a line. After the employee cut the line, his scissors fell into a 200-degree F water bath. He retrieved the scissors and hot water entered a tear in his glove and burned his hand.
DECATUR, ALABAMA—
Hexcel Corporation
An employee was removing the fourth stud on a four-hole bolt pattern to separate two vertical sections of pipe when the employee's finger was caught between the flange of the falling lower section of pipe and an adjacent pipe flange. The employee suffered an amputation of the fourth finger's distal phalanx.
SEGUIN, TEXAS—
Hexcel Corporation
While cleaning a mix pan, an employee attempted to lower a roller into the pan. The employee's left index fingertip was then caught and amputated between the roller bracket and the pan.
View Hexcel Corporation's full OSHA safety record →
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 325211)
READING, PENNSYLVANIA—
General Polymeric Corporation
An employee was monitoring a rotary press when his left hand became caught in the machinery. The employee's left middle finger was amputated at the distal interphalangeal joint.
HOLDEN, LOUISIANA—
MCM Plastics, Inc.
An employee was sweeping in an area with powdered PVC on the floor and began having difficulty breathing and coughing up blood, The employee was hospitalized for inhalation of PVC.
BAXLEY, GEORGIA—
Lawter Inc.
An employee was working on a pastillator machine, which processes resin-based materials into solid pastilles. His right hand became caught between the feed roller (operating at approximately 350 F) and the cooling belt. The employee s glove and shirt sleeve adhered to his arm due to the heat. The employee sustained third-degree burns to his right hand and forearm, requiring hospitalization and surgery.
PHILADELPHIA, PENNSYLVANIA—
AdvanSix, Inc.
An employee was troubleshooting a leak on a low pressure (less than 50 PSI) condensate line in the oxidation area of the plant. He was working to remove insulation around a valve when either the valve or the line failed, and hot condensate contacted his right arm, right abdomen area, and the front of both legs, resulting in second- and third-degree burns.
MOUNT PLEASANT, PENNSYLVANIA—
Rochling Machined Plastics
An employee was replacing a fan on a cooling unit. As he went to adjust a pump, the unit caught his right hand and the fan blades severely lacerated his index finger. He underwent a medical amputation to the finger.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.