Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Flexsteel Industries Incorporated, 212 Industrial Park Road, STARKVILLE, MISSISSIPPI 39759
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was pushing a wood rail through the blade of a table saw when the rail broke, causing the employee's right index finger to contact the saw blade.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
On August 12, 2025, an employee was scraping material off a stainless steel roller on the wrapper line when their left hand was pulled into the rollers. The employee sustained a finger amputation.
An employee backed a stand-up powered industrial truck (PIT) into the battery charging area. He dismounted the PIT and it moved forward, catching his ankle against the guardrail of the charging area. The employee's ankle was fractured and he was hospitalized.
An employee was in a powered industrial vehicle (PIV), pulling down racks. One of the racks tilted and its top portion struck his head. He suffered a head injury that required staples.
An employee was returning from lunch and went to disconnect a forklift battery from charging when he felt a shock and sustained burns to the back of his right hand. The employee was hospitalized.
An employee loaded six TV stands onto a hand truck dolly, each one weighing approximately 38 kilograms. The employee pushed one side of the dolly while his co-worker pushed on the other side of the dolly. The employee lost his footing and fell. The dolly then fell on top of him and the handle pierced his right foot through the tongue of his shoe, resulting in a puncture wound.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.