Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at MS Nonwoven, Inc., 275 Industrial Dr, PONTOTOC, MISSISSIPPI 38863
on — Amputations, affecting the hand(s) and arm(s), unspecified.
Final narrative
An employee was working on a needle press when it became jammed. While he was attempting to unjam the press, his left hand was caught in the press, resulting in the amputation of his left hand and part of his arm. The press had not finished its cycle at the time of the incident.
HospitalizedAmputationHand(s) and arm(s), unspecifiedMachinery, unspecified
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 313230)
An employee was working from a ladder and adjusting a spreader guide roller with a T-handle Allen wrench. The employee came into contact with an electrical junction box/wires, was shocked, and fell off the ladder to the concrete floor. He suffered a broken right-side rib, a puncture in the right lung, and an electrical shock burn to the right palm.
On January 3, 2025, at approximately 11:35 AM, an employee was inspecting and changing spin pumps on a line. He was using an impact gun to remove the bolts when the pressure sprayed hot polymer on his head, face, and arms resulting in burns. The employee was hospitalized.
An employee was doing quality control work to get the right thickness of the material. She contacted a component on a mill and sustained the amputation of four fingers on her right hand.
An employee was servicing the belt on a fan when their right ring finger became caught between the belt and pulley. They sustained amputation of the fingertip. The machine was locked out at the time.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.