Contact with hot objects or substances · Thermal burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Freudenberg Texbond LP, 660 Allied Industrial Boulevard, MACON, GEORGIA 31206
on — Thermal burns degree unspecified, affecting the Head and extremities.
Final narrative
On January 3, 2025, at approximately 11:35 AM, an employee was inspecting and changing spin pumps on a line. He was using an impact gun to remove the bolts when the pressure sprayed hot polymer on his head, face, and arms resulting in burns. The employee was hospitalized.
Hospitalized Head and extremities Hot or molten materials n.e.c..
An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.
An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.
After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.
More severe injuries in this industry (NAICS 313230)
An employee was working from a ladder and adjusting a spreader guide roller with a T-handle Allen wrench. The employee came into contact with an electrical junction box/wires, was shocked, and fell off the ladder to the concrete floor. He suffered a broken right-side rib, a puncture in the right lung, and an electrical shock burn to the right palm.
An employee was doing quality control work to get the right thickness of the material. She contacted a component on a mill and sustained the amputation of four fingers on her right hand.
An employee was servicing the belt on a fan when their right ring finger became caught between the belt and pulley. They sustained amputation of the fingertip. The machine was locked out at the time.
An employee was clearing a jam in a machine. The employee's finger was caught between an anvil roller and a crush cutter, resulting in a fingertip amputation at the nail bed.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.