Injured by slipping or swinging object held by injured worker · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Hamilton Precision Metals, Incorporated, 1780 Rohrerstown Road, LANCASTER, PENNSYLVANIA 17601
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was using a manual, lever-style paper cutter to cut lintless wiper tiles to size when his left thumb went over the bar. The paper cutter blade then cut his left thumb tip, resulting in an amputation from the base of the nail through the front tip of the thumb.
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 331491)
An employee was cutting a metal square on a hydraulic shear when his left hand got caught between the metal and the shear block. The employee's middle finger was amputated.
An employee was uncoupling railcars while the cars were in motion and a car ran over her left lower leg, resulting in crush injuries and amputation below the knee. The employee was hospitalized.
An employee was working to remove a piece of wood that was jamming a transfer conveyor at the shredder. He used a tool to clear the jam, then reached to grab the wood. His sleeve got caught in the conveyor and his right arm was pulled into the pulley. The employee was hospitalized with an open fracture and a crush injury/laceration to his right forearm. The machine was running at the time.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.