EMP Manufacturing, Inc.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was using an electric pallet jack to retrieve a chemical tote from a staging lane. He inserted the pallet jack under the tote and began to back up. After moving backward for approximately 15 feet, the employee tripped on a collapsible tote. As he fell, the pallet jack ran over his left foot. His ankle was lacerated and his foot was fractured.

An employee was installing network infrastructure at a client's distribution center. He was transporting a box measuring approximately 23 inches by 12 inches to a truck yard and walking along a narrow path adjacent to a trench that measured approximately 5.5 to 6 feet deep, 10 to 12 feet long, and 18 to 24 inches wide. Gravel on the path shifted beneath the employee's foot, causing him to lose balance and fall into the trench. He landed on his left side and struck a 4-inch PVC conduit pipe located at the bottom of the trench. The employee was hospitalized with fractures to his fourth, fifth, and sixth ribs on the left side.

An employee mixed sodium hydroxide pellets into a 55-gallon drum of hot water. A chemical reaction occurred and mixture splashed out of the drum, causing burns to the employee's face and neck. Personal protective equipment was not in place at the time.

An employee was cleaning a centrifugal pump. As he was cleaning a nozzle, his hand was caught in the inlet of the pump. He suffered a partial fingertip amputation.

A line leader was crouched down observing the chain and sprocket on a carpet filling machine for maintenance or repair when another employee got his right index finger caught between the chain and sprocket. Skin and the fingernail were removed and the employee required surgical amputation of the fingertip to the first knuckle.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.