Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Graphic Packaging International, LLC, 9978 FM 3129, QUEEN CITY, TEXAS 75572
on — Second degree heat (thermal) burns, affecting the nonclassifiable.
Final narrative
An employee was repairing a hole on a steam and condensate blowdown line in the power house when the steam caused second degree burns to 50 percent of the employee's body.
An employee was loading a chemical mixture intermediate bulk container tote from a pipeline to a tank. The employee went to disconnect the container and they were splashed with the chemical mixture that was in the pipeline, resulting in chemical burns to both legs.
A pulp mill employee was working around a fiber line. While connecting or disconnecting a hose between pipes, the employee came into contact with hot black liquor (sodium hydroxide). The employee suffered first-degree burns to the torso area and was hospitalized.
An employee was troubleshooting cup transfer issues on a cup machine. The employee installed his company issued by-pass key, opened the machine's gull wings (guards), and began making air adjustments. The employee reached to remove a deformed cup and his middle and ring fingers got caught between a mandrel and the bottom maker die block resulting in amputations.
On November 16, 2023, a maintenance employee was servicing a belt and pulley system on a blower motor. They were manually manipulating the belt and pulley when the glove on their left hand got caught in a nip point. Their little finger was pulled into the nip point resulting in amputation of the fingertip.
An employee was using prybars to remove a diverter plate from a power boiler bark chute. The lower chute broke free and flipped over. As the employee reached out to try to stop the chute section from falling, his right index finger was pinched between the diverter plate and the bark chute. Their finger was amputated at the first knuckle.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 322121)
Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.
An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.
An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.
An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.
An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.