Action Manufacturing Company

An employee was disarming safety and arming devices when detonators exploded, causing burns and lacerations to both the employee's hands.

An employee was preparing an energetic mixture when the mixture detonated causing burns and lacerations to the employee's arms and stomach region.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.

At about 2:15 p.m. on February 10, 2025, employees were unloading pallets of propellant into a storage warehouse. The pallets were double stacked, and a top-loaded pallet had shifted in transit. Two employees were manually moving the pallet when the fiber packs shifted, causing one employee's left index finger to be pinched between the fiber pack and the pallet. The employee suffered a partial amputation to the fingertip.

An employee was walking on the sidewalk near the administrative building when he slipped on ice and fell to the concrete ground. The employee suffered a left hip fracture and was hospitalized.

A CNC operator was trying to replace a bearing in the hydraulically operated steadying fixture in a CNC machine. The fixture retracted, amputating the end of his right thumb.

An employee was changing an insert in the tool head of a CNC machine. The employee had stepped up approximately 28 inches onto the door track of the machine. When the employee went to step back down to the floor, they lost balance and fell backward onto a rack of metal parts. The employee sustained a compression fracture to the spine.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.