Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at LAWRENCE PAPER COMPANY, 2801 LAKEVIEW RD., LAWRENCE, KANSAS 66049
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was trying to free a piece of trim that was stuck in the rollers of the roller machine when his left hand was pulled into the machine and crushed. Four fingers on the left hand were amputated. The employee was wearing gloves at the time.
HospitalizedAmputationFinger(s), fingernail(s), n.e.c.Paper production machinery, unspecified
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 322211)
On October 22, 2025, an employee was working to put a conveyor chain back on the track of a conveyor when their fingers were caught between the chain and the chain track, pulling their right hand into the sprocket. Four fingers were amputated.
An employee was cleaning the headers of the core machine using a hand drill with a brush attachment. His glove was caught on the brush shaft, resulting in amputation of the left middle fingertip.
An employee was operating a winder paper mill machine when their right index finger became caught in the machine. The finger was partially amputated at the first knuckle.
An employee was lubricating a chain and sprocket on a corrugator splicer. He lost his balance, and his right middle finger came into contact with the chain and sprocket. The fingertip was amputated at the nail bed.
An employee was entering a building and reached out to catch a closing door. The door closed on the employee's finger, resulting in the partial amputation of the fingertip and nailbed.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.