WALLER, TEXAS—
Goodman Manufacturing Company, L.P.
Struck by falling object or equipment, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Goodman Manufacturing Company, L.P., Daikin Texas Technology Park, WALLER, TEXAS 77484 on — Fractures, affecting the leg(s), unspecified.
Watch Goodman Manufacturing Company, L.P. — free
Get an email when a new federal OSHA severe-injury report for Goodman Manufacturing Company, L.P. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was manually maneuvering a steel coil weighing 1,320 lbs. from the storage area to the forks of his forklift when the steel coil fell onto him. The employee was hospitalized for bruises and lacerations and leg fractures.
More severe injuries at Goodman Manufacturing Company, L.P.
WALLER, TEXAS—
Goodman Manufacturing Company, L.P.
An employee was working at a die transfer system when their finger became caught between the crossbar and the edge of the die in the transfer system. The employee sustained a finger amputation.
WALLER, TEXAS—
Goodman Manufacturing Company, L.P.
An employee sustained a cut on their leg.
WALLER, TEXAS—
Goodman Manufacturing Company, L.P.
The injured employee was parked in a tugger. A reach truck driver was relocating a container that was behind a stack of containers. The forks came into contact with the stack of containers, tipping it over onto the injured employee's tugger. The injured employee was hospitalized with lacerations to both hands and the right side of their face.
WALLER, TEXAS—
Goodman Manufacturing Company, L.P.
An employee was removing material from a container when the material shifted, causing his right pinky fingertip to be caught between the material and the wall of the container. The employee sustained a partial amputation to the right pinky fingertip.
WALLER, TEXAS—
Goodman Manufacturing Company, L.P.
An employee was putting a bend channel in a sheet of metal using a press brake. The brake actuated and the sheet metal rose up against the brake die, smashing the employee's fingers between the brake die and the sheet metal. The employee suffered a partial amputation of the left middle finger at the last joint.
View Goodman Manufacturing Company, L.P.'s full OSHA safety record →
Similar incidents · Same event type
FORNEY, TEXAS—
Amazon FTW5
An employee was unloading a trailer when a box fell and struck the employee in the face. The employee suffered a concussion and was hospitalized.
EL PASO, TEXAS—
Tuff Shed, Inc.
An employee had been cutting lumber for a shed wall. A load of 16-foot trim pieces fell onto the employee causing vertebrae and ankle fractures.
MIDLAND, TEXAS—
Lufkin Industries
An employee was unloading 30-foot 2-inch barrels from a pan holding about 20 barrels. The barrels tipped over, striking and breaking both of the employee's lower legs.
CYPRESS, TEXAS—
Cy-Fair Coatings Inc
An employee was in a sandblasting area, preparing the surface of a plate heat exchanger frame for painting. The frame fell on the employee, who suffered fractures to vertebrae, the neck, pelvis, and rib cage; and punctured lungs.
MIAMI, FLORIDA—
Rodriguez General Carpentry
An employee was installing doors when one of the doors fell on him, fracturing his lower leg. The employee was hospitalized.
More severe injuries in this industry (NAICS 333415)
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
DANVILLE, ILLINOIS—
American Event Services LLC
An employee was holding a piece of rubber while it was being cut on a band saw. The saw blade amputated his right middle fingertip without bone loss.
GILMER, TEXAS—
Coil Specialist, Inc.
An employee was observing expansion rods on a coil expander going into a coil to ensure copper stubs weren't being bent. His left hand was caught between the locking block and locking block clamp on the power press machine, resulting in partial amputation of his left little finger from the distal interphalangeal joint.
DANVILLE, ILLINOIS—
American Event Services LLC
An employee was setting up a press brake and rolling over a die when the tip of their left little finger was caught between the horizontal working surface of the press brake and die. The employee sustained partial amputation of their fingertip.
WICHITA, KANSAS—
JC Residential and Light Commercial LLC
An employee was working to remove an access panel to begin performing maintenance on a machine. The set pins on the bottom of the panel were broken. The bottom kicked out and fell, striking the employee's left foot and resulting in a fracture to the big toe.
More severe injuries in TEXAS
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
HOOKS, TEXAS—
EnviroSafe Demil LLC
An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.
LOLITA, TEXAS—
Inteplast Group
An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.
HALLETTSVILLE, TEXAS—
Regency IHS of Fairwinds Halletsville, LLC
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.