Struck by object falling from vehicle or machinery-other than vehicle part · Fractures and dislocations
At a glance
Federal OSHA recorded a severe workplace injury
at US Foundry & Machine, Inc., 18649 Brake Shoe Road, MEADVILLE, PENNSYLVANIA 16335
on — Fractures and dislocations, affecting the hand(s) and arm(s), n.e.c..
Final narrative
An employee was using a crane to lift the actuator out of a machine. The actuator fell onto the employee's right hand, breaking four fingers and the wrist and dislocating the radius. The employee was hospitalized.
HospitalizedHand(s) and arm(s), n.e.c.Machine and appliance parts, n.e.c.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 333511)
An employee was operating an overmolding injection machine. His left hand was crushed when the hydraulic plates came together to complete the overmold process. The employee was hospitalized with a fractured left ring finger and abrasions on both sides of his hand.
On April 4, 2025, an employee was assembling a cooker and was positioning a shaft inside the shell. The shaft was lifted up on each end. When the weight is off the shell, cranes move north or south to position the cooker inside the shell. The cooker shaft suddenly moved and his right middle finger was caught between the cooker shell and a gauge block. The finger was amputated to the bottom of the fingernail.
An employee was using a floor-mounted vertical sander to deburr a part. The part got caught between the guard and the sander. The employee's hand was pulled in and the sander crushed the employee's fingers.
An employee was operating a wax injection die. The die's metal lid (which weighed about 125 pounds) fell on his hand. He suffered crush injuries to the index and middle fingers that required surgery.
On June 27, 2024, an employee was assembling a completed mold top weighing 1,261 pounds. The hook from the hoist was under tension. She went to adjust the hook and it moved, catching her left thumb against the mold top. She sustained an amputation to the tip of the thumb.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.