Corelle Brands, LLC

An employee was applying labels to a skid. The employee slipped on a sheet of labels that had fallen to the floor and fell to the concrete floor, suffering a broken hip that required surgery.

An employee was operating an electric forklift in the facility and backed into a control box. The employee's right index finger was caught between the forklift's overhead support and the control box resulting in amputation to the second knuckle.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

On September 1, 2024, two employees were dislodging the latch of a hopper to dump a load of glass fragments. The injured employee stopped to walk around to the other side. The other employee freed the latch and the load of glass fragments was dumped, pinning the injured employee to the ground. The injured employee was hospitalized with a fractured left femur.

An employee was walking when they fell and struck the front of their head.

An employee was adjusting the vacuum control valve on the right side of an A-frame arm when their finger was caught between the vent blow pipe and the control valve. The employee's right middle finger was partially amputated.

An employee was opening the milling machine when they began experiencing respiratory issues such as a running rose, coughing, and eye itching from the milling machine vapors. The employee was hospitalized.

An employee was rolling a table with glassware product loaded on it. The table collapsed onto the employee, who suffered a broken lower leg.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.