Struck, caught, or crushed in other collapsing structure or equipment · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Instant Brands, LLC, 1 Steuben Street, CORNING, NEW YORK 14830
on — Fractures, affecting the lower leg(s).
Final narrative
An employee was rolling a table with glassware product loaded on it. The table collapsed onto the employee, who suffered a broken lower leg.
An employee was adjusting the vacuum control valve on the right side of an A-frame arm when their finger was caught between the vent blow pipe and the control valve. The employee's right middle finger was partially amputated.
A mixer truck driver was delivering a load of concrete to a jobsite. The driver was operating the controls outside of his truck when a 6x10-foot fascia wall gave way. One of the concrete fascia panels struck the driver's right calf resulting in amputation of the leg below the knee.
An employee was receiving a 32-by-8 panel wall that weighed 3,500 pounds. As the crane was going up, the cable of one of the clanks became caught on the panel wall. The panel wall collapsed and struck the employee's right leg, resulting in right leg fractures and amputation below the knee.
An employee was moving conveyors in a warehouse to another location using rolling casters. The legs became detached from the bottom of the conveyor, and the employee's right index finger was caught in the conveyor pinch point, resulting in a fingertip amputation.
On September 1, 2024, two employees were dislodging the latch of a hopper to dump a load of glass fragments. The injured employee stopped to walk around to the other side. The other employee freed the latch and the load of glass fragments was dumped, pinning the injured employee to the ground. The injured employee was hospitalized with a fractured left femur.
An employee was adjusting the vacuum control valve on the right side of an A-frame arm when their finger was caught between the vent blow pipe and the control valve. The employee's right middle finger was partially amputated.
An employee was opening the milling machine when they began experiencing respiratory issues such as a running rose, coughing, and eye itching from the milling machine vapors. The employee was hospitalized.
On November 13, 2021, an employee was using a pipe wrench to unjam a pulley on a conveyor system. When the pulley unjammed, his right ring finger was caught between its frame and the pipe wrench. The fingertip was amputated at the bottom of the nail.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.