Caught between rolling powered vehicle and other object · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Spectrum Brands Central Fulfillment Center, 31100 W. 196 St., EDGERTON, KANSAS 66021
on — Amputations, affecting the toes(s), toenail(s).
Final narrative
An employee's foot/toes were caught between a moving lift truck and angle iron. The employee's left big toe was crushed, resulting in its amputation.
HospitalizedToes(s), toenail(s)Forklift, order picker, platform truck-powered
More severe injuries at Spectrum Brands Central Fulfillment Center
An employee bumped into a door frame while carrying a 5-gallon bottle of water. He fell to the ground and suffered an injury to his upper leg/hip area.
An employee driving a forklift made a left turn to go into a rack aisle, then stopped to let another employee lower their forklift. The employee then lost control of the forklift while passing the other lift. The employee reached out to brace himself prior to impact with a cross beam and his left pinky finger was pinched between the forklift and the cross beam. The fingertip was amputated.
On December 13, 2023, an employee was operating a forklift. When they stepped off the forklift, it crushed their left foot between the lift and a racking system. The employee suffered a foot fracture that required hospitalization.
An employee was maneuvering a motorized pallet jack while standing in front of it. He became pinned between the pallet jack and a steel rack cross-beam, resulting in a contusion to his chest/back and a fractured rib.
An employee was stacking empty drums into a trailer. The employee then exited the trailer, using the forks of a forklift as a step. The forklift's parking brake failed, causing the forklift to move forward and pin the employee's right leg between the forklift and the trailer. The employee's right lower leg was crushed, resulting in a fracture and a laceration.
An employee had been spraying weeds behind a school. As he was leaving the field, the employee drove his truck up to the gate, got out, and opened the gate. The truck rolled forward and pinned him against the fence/gate. The gate then gave way and opened from the force of the truck. The employee's left index fingertip got caught in the fence/gate and was amputated.
An employee was using a walk-behind tugger to pull a grinder. The employee's left little finger was pinched between the handle of the tugger and the framework of a staircase. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.