Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Okay Industries, Inc., 245 New Park Drive, BERLIN, CONNECTICUT 06037
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was working on an automation assembly laser machine when parts moved unexpectedly. The employee's finger was caught in the machine as it advanced, and he suffered a broken bone and a partial fingertip amputation requiring surgery. The machine was not locked out at the time.
AmputationFingertip(s)Special process machinery, unspecified
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 339112)
On August 15, 2025, an employee was in a small room right before the exit. The door in the little room was locked. The employee climbed over a wall and hopped down to the other side, falling and resulting in a twisted right ankle. The employee was hospitalized.
On August 14, 2025, an employee was assembling cables using a molding machine. When the machine was engaged, the mold came down and caught the employee's left hand, amputating three fingers.
On August 8, 2025, an employee was operating a table-top injection molding machine. He refilled the barrel of the machine with resin and began a pack procedure in which the plunger of the machine moved into the barrel to compress plastic pellets into the mix. The plunger caught and amputated his fingertip.
An employee was working to move a pallet jack that had gotten stuck between the dock and the trailer. When the equipment was loosened, it struck the employee, throwing them backward onto the ground. The employee sustained fractured ribs and injury to their spleen and liver.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.