Hi-Tek Environmental, Inc. dba STAT Analysis Corporation
Exposure through intact skin, eyes, or other exposed tissue · Chemical burns and corrosions, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Hi-Tek Environmental, Inc. dba STAT Analysis Corporation, 2242 W. Harrison Street, CHICAGO, ILLINOIS 60612
on — Chemical burns and corrosions, unspecified, affecting the head and trunk.
Final narrative
An employee was working in a laboratory and was pouring 1:1 HN03 (nitric acid) out of a 1000ml flask into a 4-liter reagent bottle inside a fume hood when the neck of the 1000ml flask broke and HN03 splashed onto the employee's chest and face. The employee was hospitalized for chemical burns to the chest and face.
On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.
An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.
An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.
An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.
An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.
More severe injuries in this industry (NAICS 541712)
A temporary employee climbed onto a 28-inch high table to clean the top of the head assembly of the profile saw used to cut polyurethane foam. While cleaning, he tripped over the pneumatic hose and struck the blade. He then fell over to the other side of the head assembly onto the table. The employee sustained an amputated right foot and a laceration on his left leg. The machine was not locked out/tagged out and guarding was not used at the time.
An employee was sitting in an office chair when his foot caught on one of the rollers. He fell from the chair to the floor and suffered a broken hip. He was hospitalized.
An employee was disconnecting a resistor in an electrical test setup and contacted an energized power terminal. The employee suffered an electric shock and was hospitalized.
An employee was walking down the hallway when they tripped over a raised concrete slab on the floor and fell. They sustained a right elbow fracture that required hospitalization.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.