DUGGAN MECHANICAL SERVICES, INC

An employee was climbing a ladder when the ladder began sliding, causing the employee to jump approximately 12 feet to the ground and resulting in fractures to the right ankle and left thumb.

On 6/08/2019, an employee was power washing a building from inside a motorized bucket lift when the water hose of the power washer became lodged in the lift, causing it to trigger the up switch located in the bucket. When the lift began to rise unexpectedly, the employee jumped out of the lift, falling approximately 12 feet to the concrete sidewalk below. The employee fractured the left arm, nasal, and orbital bones; suffered a concussion and blood clot; and lacerated the left leg.

An employee was on a manlift changing light bulbs. Rail cars were being moved and the employee felt like the rail car was going to hit the lift therefore, he jumped approximately 10 to 12 feet to the ground resulting in a fractured left arm and a fractured right leg and ankle.

On October 3, 2017, at approximately 10:00 a.m., an employee was descending a ladder when his lanyard became tangled around his feet. He turned and jumped approximately 13 feet, fracturing both of his heels and requiring hospitalization.

An employee jumped off the 2nd floor balcony to avoid being bitten by a dog and was injured. The employee jammed the left thumb and sprained their lower back upon impact with the ground.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.

An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.

While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.

An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.

An employee was trimming out sprinklers on the exterior of a building when he fell off an extension ladder. He landed on the ground and sustained fractures to his nose and arm.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.