DIERKS, ARKANSAS—
Weyerhaeuser Company
Compressed or pinched by shifting objects or equipment · Multiple nonspecified injuries and disorders
At a glance
Federal OSHA recorded a severe workplace injury at Weyerhaeuser Company, 120 Main Avenue, DIERKS, ARKANSAS 71833 on — Multiple nonspecified injuries and disorders, affecting the upper arm(s).
Final narrative
An employee was performing preventative maintenance on a trimmer and when he went to lower the saw box platform, the pin holding the platform became stuck. The employee hammered at the pin, and when the pin dislodged, the platform swung down and hit the employee. The employee suffered a smashed upper arm with swelling and numbness.
More severe injuries at Weyerhaeuser Company
EMERSON, ARKANSAS—
Weyerhaeuser Company
An employee performed maintenance on various machines when they began to feel hot and unwell, and they experienced cramping. The employee was hospitalized with heat stress or dehydration.
DIERKS, ARKANSAS—
Weyerhaeuser Company
An employee was sanding a metal shaft on a lathe when his right thumb when under the sandpaper, resulting in the amputation of the distal portion of the thumb.
EMERSON, ARKANSAS—
Weyerhaeuser Company
An employee was operating a press and attempting to lower a press platform down when they experienced heat exhaustion.
SIMSBORO, LOUISIANA—
WEYERHAEUSER COMPANY
An employee was clearing a jam on a panel stacker when several oriented strand board (OSB) panels fell onto her hands causing a laceration and fracture to the left hand and a laceration to the right ring finger.
COLUMBIA FALLS, MONTANA—
Weyerhaeuser Company
An employee smashed a finger between bearing housing of rolls and a sander framework.
View Weyerhaeuser Company's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 321113)
STATESBORO, GEORGIA—
Claude Howard Lumber Company
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
FREEPORT, TEXAS—
Shintech Inc
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
OPELIKA, ALABAMA—
West Fraser, Inc.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
REDWOOD, MISSISSIPPI—
SWS Sawmill, LLC
An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.
ATHOL, IDAHO—
IDAHO FOREST GROUP, LLC
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.