WEYERHAEUSER COMPANY

An employee performed maintenance on various machines when they began to feel hot and unwell, and they experienced cramping. The employee was hospitalized with heat stress or dehydration.

An employee was sanding a metal shaft on a lathe when his right thumb when under the sandpaper, resulting in the amputation of the distal portion of the thumb.

An employee was operating a press and attempting to lower a press platform down when they experienced heat exhaustion.

An employee was performing preventative maintenance on a trimmer and when he went to lower the saw box platform, the pin holding the platform became stuck. The employee hammered at the pin, and when the pin dislodged, the platform swung down and hit the employee. The employee suffered a smashed upper arm with swelling and numbness.

An employee smashed a finger between bearing housing of rolls and a sander framework.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

An employee was working with a group of tree trimmers to trim a tree that was approximately 66 feet high and 28 inches in diameter. When the tree fell, it struck the employee. He was hospitalized with multiple fractures to the left side of his body, including his head.

On July 18, 2025, at approximately 1:09 PM, an employee was moving a trailer-mounted de-limber. He set his ground saw on the de-limber trailer and then got off the loader and stood to the side of the ground saw. A grapple skidder was raising the trailer slightly so he could throw the chain under the trailer to secure the ground saw. He then turned around and the ground saw slid off the trailer and struck his back. The employee was hospitalized with four fractured vertebrae.

On June 23, 2025, an employee was assisting with a tire replacement. As the employee was returning with tools, two co-workers were positioning the tire on the hub. The tire released pressure, causing a piece of the split rim to strike the employee. They were hospitalized with a fractured left ankle and pelvis.

An employee was cutting a tree. As they were walking away, part of the tree broke off and struck the employee. The employee sustained five broken ribs and a punctured lung.

An employee was climbing down a tree after setting a rope to allow the tree to be removed. A knot at the end of his climbing system failed and he fell from the tree, landing about 35 feet below. He suffered fractures to the pelvis and spinal cord and was hospitalized.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.

A security employee was holstering her firearm when the gun discharged a bullet into her right leg. The employee was hospitalized.

A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.