Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at CARGILL INC, 2154 HWY 44, RESERVE, LOUISIANA 70084
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was securing empty barges when his right middle finger was caught between a mule rope and a barge cleat. He suffered an amputation to the finger.
An employee was conducting preventive maintenance on a decline conveyor, spraying lubricant on its tension rollers, when his left arm was caught by the conveyor system and pulled between the roller and the belt. He suffered a fracture to the wrist and two fractures to the forearm.
An employee was bringing a filter online. When the employee opened a valve to initiate flow through the filter, the gasket on the filter housing failed, spraying a water/erythritol mixture (heated to about 175 degrees Fahrenheit) toward the employee. The employee moved back quickly and their chemical suit caught on something, causing it to open. The mixture burned the employee's abdomen and left arm.
An employee was replacing the exhaust fan above the scalding area when their finger became pinched in the exhaust fan shroud. The employee sustained amputation of the distal tuft of their right middle finger with bone loss.
On July 17, 2024, an employee was trying to retrieve his knife from the bottom of a sterilizer. Water in the sterilizer, heated to 180 degrees, entered the employee's right glove and burned his palm and the top of his hand. He was hospitalized.
An employee was waiting for the elevator to get to the floor that he worked on. The employee went to step through the elevator door, but the elevator lift was not there, causing him to fall 20 feet to the basement below. The employee sustained fractures in both legs, the right heel, and lower vertebrae. He was hospitalized.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 424510)
An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.
An employee had been cleaning a grain bin. He walked across the bin and his left foot contacted an unguarded floor auger, resulting in severe lacerations to the foot. The auger was not locked out/tagged out at the time.
On September 23, 2025, an employee was monitoring a feed roller when they tripped and their right hand contacted the roller. The employee was hospitalized and their right hand was amputated at the wrist.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.