KLOEPFER, INC.

An employee was fueling an excavator from the fuel tank in the bed of the truck while standing on the bumper of the truck. The plastic on the bumper broke, causing the employee to fall to the ground and resulting in a fractured right femur just below the joint.

An employee was clearing ice from a batch roller on a ready mix concrete (RMC) truck. The roller caught his sweatshirt and pulled in his arm. The arm was broken and he was hospitalized, requiring surgery.

An employee was driving a double pallet jack down an aisle when another piece of equipment came through the aisle. Realizing that the two pieces of equipment were about to collide, the employee jumped off the pallet jack. It then ran over his leg, breaking his leg/ankle.

An employee was operating a forklift when the load shifted. The employee jumped from the forklift and it rolled backward, falling off the ramp and pinning the employee underneath it. They sustained head trauma and injuries to the shoulder, arm, pelvis, and leg.

An employee was operating a rider-style powered pallet jack. He lost his balance causing him to fall off and become trapped between it and a wall. He suffered a broken pelvis and was hospitalized.

An employee was operating a stand-on mower down a hill when the mower started sliding. The employee jumped off the mower and fell to the ground. Their hand was cut by the mower blade, resulting in a laceration and a thumb amputation.

An employee was driving a package car around a building on UPS property when the vehicle struck a bump. The force from hitting the bump unbuckled the employee's seatbelt and caused them to fall out of the vehicle onto the asphalt. The employee was hospitalized and required surgery for fractures to their hip and pelvis.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.

An employee tripped over a bin and fell to the floor. She landed on her hip and braced herself with her arm, resulting in a fractured hip and wrist.

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.